Oil Spill Recovery Barges
   
11.5 ft. x 41ft.(C28) |
(28,000 LBS Capacity, Triple Hull) |
Hulls are welded and pressure tested. Built with 3/16in. 5086 aluminum.
- Special funnel V- bow for maximum oil intake.
- Custom hull dimensions for desired payload rating. Internal holding tank 1250 gallons with multiple hatch access.
- Motor Pod:
Motor pods to accommodate motors up to
250 hp motor.
- Single or Dual configurations.
- Options :
Console Placement, T-Tops, Railing,
Tie-Downs & Trailer.
- Many other options and features are available.

Contact the factory at:
1-800-521-5880 or 1-509-624-4333 |
|
8.5ft x 26ft (C11)
|
(11,000 LBS Capacity, Triple Hull)
|

Width 8 1/2 ft.
(Options up to 12 ft.)
Length 26 ft.
(Options up 40 ft.)
- Hulls are welded and pressure tested.
- Custom hull dimensions for desired payload rating.
- Motor Pod:
Motor pods to accommodate motors up to
250 hp motor.
Single or Dual configurations.
- Options :
Console Placement, T-Tops, Railing,
Tie-Downs & Trailer.
|

Standard Bi-Hull design.
Optional Tri-Hull with built-in double walled storage tank.
Standard Payload for 8 1/2 x 26 ft is 11,000
Payload ratings vary depending on the hull sizes & dimensions and vary from
5000 lbs to 40,000 lbs.
 |
10ft x 40ft (C20)
|
(20,000 LBS Capacity, Triple Hull)
|

GENERAL ARRANGEMENT
HULL WEIGHT: 7,100 LB
BOAT WEIGHT WITH MOTORS (FULL TANKS): 8,600 LB (17,000 LB)
WORKBOAT CAPACITY: 20,000 LB
CG: 23'-9" (21'-10") FROM BOW
ATTITUDE: 0'-4 3/8" (0'-2 1/2") UP
DEPTH AT STERN: 0'-8 1/8" (1'-0")
10ft x 40ft (C32) |
(32.250 LBS Capacity, Triple Hull)
|

GENERAL ARRANGEMENT
HULL WEIGHT: 8,700 LB
BOAT WEIGHT WITH MOTORS (FULL TANKS): 10,200 LB (26,800 LB)
WORKBOAT CAPACITY: 32,250 LB
CG: 23'-4" (21'-3") FROM BOW
ATTITUDE: 0'-4 3/8" (0'-1 1/2") UP
DEPTH AT STERN: 0'-9" (1'-5 1/8")
10ft. x 40ft.(C40) |
(44,000 LBS Capacity, Triple Hull)
|

GENERAL ARRANGEMENT
HULL WEIGHT: 10,000 LB
BOAT WEIGHT WITH MOTORS (FULL TANKS): 11,500 LB (36,500 LB)
WORKBOAT CAPACITY: 44,000 LB
CG: 23'-1" (21'-0") FROM BOW
ATTITUDE: 0'-3" (0'-0 3/4") UP
DEPTH AT STERN: 0'-9 1/8" (1'-10")

Many other options and features are available.
Contact the factory at:
1-800-521-5880 or 1-509-624-4333
|